Outdated Penguware

[ninja1997]

это не кряк а какое-то наебалово походу

 

[044brodsky]

инжектится но меню нет

 

[Lonar_HvH]

инжектится но меню нет

вручную по очереди попробуй у меня всё работает

 

[saimon123456]

undetected?

 

[044brodsky]

вручную по очереди попробуй у меня всё работает

всё равно нет меню, через ехе

 

[pseud0coder]

меню не появляется, что делать, всё инжектится

 

[Fevzi228335]

шо це такое

 

[kraken1221]

Посмотреть вложение 3904 шо це такое

тоже самое.

 

[screeazxd]

рейдж кфг дайте, лень настраиватб(9

 

[Xaski228]

залей на другой файло обменник не могу скачать

 

[0xFC]

а теперь вот такая ошибка...

Посмотреть вложение 3901

This problem is from VS 2015 silently failing to copy ucrtbased.dll (debug) and ucrtbase.dll(release) into the appropriate system folders during the installation of Visual Studio. (Or you did not select "Common Tools for Visual C++ 2015" during installation.) This is why reinstalling may help. However, reinstalling is an extreme measure... this can be fixed without a complete reinstall. First, if you don't really care about the underlying problem and just want to get this one project working quickly, then here is a fast solution: just copy ucrtbased.dll from C:\Program Files (x86)\Windows Kits\10\bin\x86\ucrt\ucrtbased.dll (for 32bit debug) into your application's \debug directory alongside the executable. Then it WILL be found and the error will go away. But, this will only work for this one project. A more permanent solution is to get ucrtbased.dll and ucrtbase.dll into the correct system folders. Now we could start copying these files into \Windows\System32 and \SysWOW64, and it might fix the problem. However, this isn't the best solution. There was a reason this failed in the first place, and forcing the use of specific .dll's this way could cause problems. The best solution is to open up the control panel --> Programs and Features --> Microsoft Visual Studio 2015 --> Modify. Then uncheck and re-check "Visual C++ --> Common Tools for Visual C++ 2015". Click Next, then and click Update, and after a few minutes, it should be working. If it still doesn't work, run the modify tool again, uncheck the "Common Tools for Visual C++ 2015", and apply to uninstall that component. Then run again, check it, and apply to reinstall. Make sure anti-virus is disabled, no other tasks are open, etc. and it should work. This is the best way to ensure that these files are copied exactly where they should be. Note that if the modify tool gives an error code at this point, then the problem is almost certainly specific to your system. Research the error code to find what is going wrong and hopefully, how to fix it.

 

[Zedd]

error for me

 

[luaVegas]

This problem is from VS 2015 silently failing to copy ucrtbased.dll (debug) and ucrtbase.dll(release) into the appropriate system folders during the installation of Visual Studio. (Or you did not select "Common Tools for Visual C++ 2015" during installation.) This is why reinstalling may help. However, reinstalling is an extreme measure... this can be fixed without a complete reinstall. First, if you don't really care about the underlying problem and just want to get this one project working quickly, then here is a fast solution: just copy ucrtbased.dll from C:\Program Files (x86)\Windows Kits\10\bin\x86\ucrt\ucrtbased.dll (for 32bit debug) into your application's \debug directory alongside the executable. Then it WILL be found and the error will go away. But, this will only work for this one project. A more permanent solution is to get ucrtbased.dll and ucrtbase.dll into the correct system folders. Now we could start copying these files into \Windows\System32 and \SysWOW64, and it might fix the problem. However, this isn't the best solution. There was a reason this failed in the first place, and forcing the use of specific .dll's this way could cause problems. The best solution is to open up the control panel --> Programs and Features --> Microsoft Visual Studio 2015 --> Modify. Then uncheck and re-check "Visual C++ --> Common Tools for Visual C++ 2015". Click Next, then and click Update, and after a few minutes, it should be working. If it still doesn't work, run the modify tool again, uncheck the "Common Tools for Visual C++ 2015", and apply to uninstall that component. Then run again, check it, and apply to reinstall. Make sure anti-virus is disabled, no other tasks are open, etc. and it should work. This is the best way to ensure that these files are copied exactly where they should be. Note that if the modify tool gives an error code at this point, then the problem is almost certainly specific to your system. Research the error code to find what is going wrong and hopefully, how to fix it.

Чел ты написал как это сделать если у тебя есть исходы ,тоесть пофиксить свой проект ,а это как видишь обычная длл

 

[Zedd]

how to fix error ?

 

[0xFC]

Чел ты написал как это сделать если у тебя есть исходы ,тоесть пофиксить свой проект ,а это как видишь обычная длл

You are wrong!
Read again!

 

[luaVegas]

You are wrong!
Read again!

Я прочитал и ты написал, что нужно visual studio.
Может сам прочитаешь

 

[guccimaneskeet]

This problem is from VS 2015 silently failing to copy ucrtbased.dll (debug) and ucrtbase.dll(release) into the appropriate system folders during the installation of Visual Studio. (Or you did not select "Common Tools for Visual C++ 2015" during installation.) This is why reinstalling may help. However, reinstalling is an extreme measure... this can be fixed without a complete reinstall. First, if you don't really care about the underlying problem and just want to get this one project working quickly, then here is a fast solution: just copy ucrtbased.dll from C:\Program Files (x86)\Windows Kits\10\bin\x86\ucrt\ucrtbased.dll (for 32bit debug) into your application's \debug directory alongside the executable. Then it WILL be found and the error will go away. But, this will only work for this one project. A more permanent solution is to get ucrtbased.dll and ucrtbase.dll into the correct system folders. Now we could start copying these files into \Windows\System32 and \SysWOW64, and it might fix the problem. However, this isn't the best solution. There was a reason this failed in the first place, and forcing the use of specific .dll's this way could cause problems. The best solution is to open up the control panel --> Programs and Features --> Microsoft Visual Studio 2015 --> Modify. Then uncheck and re-check "Visual C++ --> Common Tools for Visual C++ 2015". Click Next, then and click Update, and after a few minutes, it should be working. If it still doesn't work, run the modify tool again, uncheck the "Common Tools for Visual C++ 2015", and apply to uninstall that component. Then run again, check it, and apply to reinstall. Make sure anti-virus is disabled, no other tasks are open, etc. and it should work. This is the best way to ensure that these files are copied exactly where they should be. Note that if the modify tool gives an error code at this point, then the problem is almost certainly specific to your system. Research the error code to find what is going wrong and hopefully, how to fix it.

Not working lol tried with microsoft visual studio

 

[0xFC]

Not working lol tried with microsoft visual studio

have you tried to uninstall c++ redistributables and .net and restart pc then install again?
Because all errors are mentioned in other posts it's c++ redistributable errors. It means you didn't install it correct way.
Sometimes it's happening you have to reinstall. same with dx sdk!
Also If you really wanna install start from lower versions c++ redistributable and go higher step by step and install both versions

 

[0xFC]

have you tried to uninstall c++ redistributables and .net and restart pc then install again?
Because all errors are mentioned in other posts it's c++ redistributable errors. It means you didn't install it correct way.
Sometimes it's happening you have to reinstall. same with dx sdk!
Also If you really wanna install start from lower versions c++ redistributable and go higher step by step and install both versions

If this not work for you then you have reinstall your windows because you fucked up some shit with your pc!

 

[Socialist]

Someone have good cfg ?